10 ANALOG CONVENTIONAL SYSTEM
10.1 Initiating Voice Communications (Basic Transmission and Reception)
Operating the Transceiver
Squelch Off key
1
Press the
Squelch Off
The "
" icon appears. The Busy LED lights green if Busy LED is
enabled.
The transceiver unmutes the speaker and opens squelch
regardless of the configuration for QT/DQT Decode. White noise
is audible if no carrier is received.
2
Press the
Squelch Off
The "
" icon disappears. On a channel where QT tone or DQT
code is configured, the transceiver restores Signaling Squelch,
and on a channel where no QT tone or DQT code is configured,
the transceiver restores Carrier Squelch.
Squelch Off Momentary key
1
Press and hold the
The "
" icon appears. For NX-200S/ NX-300S, Key Beep A
sounds from the transceiver.
The Busy LED lights green if Busy LED is enabled.
The transceiver unmutes the speaker and opens squelch
regardless of the configuration for QT/DQT Decode. White
noise is audible if no carrier is received.
FUNC (K)/Ver 4.00
key while Squelch Off is disabled.
key while Squelch Off is enabled.
Squelch Off Momentary
key.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS
INDEX
252