Kenwood NEXEDGE NX-200 Function Reference page 531

23 FUNCTIONS LINKED WITH A VEHICLE
23.2 Controlling Car Behavior by Linking with the Horn Alert Port State (Horn Alert)
Horn Alert Status When the Transceiver Is Turned ON (Horn Alert Mode)
Horn Alert Mode is a function to enable or disable Horn Alert, depending on the configuration, when the transceiver is
turned ON.
The Horn Alert state when the transceiver is turned ON can be configured using KPG-111D/ DN.
Configuration
Current When the transceiver is turned ON, the transceiver always starts up with Horn Alert disabled.
If Horn Alert is enabled or disabled by pressing the Horn Alert key or selecting Horn Alert from Menu Mode, the
Status Memory status of Horn Alert, either enabled or disabled, can be retained in the transceiver. When the transceiver is turned
ON, the transceiver starts up in the same Horn Alert state as was retained in the transceiver (enabled or disabled).
Startup When the transceiver is turned ON, the transceiver always starts up with Horn Alert enabled.
Configuration using KPG-111D/ DN
Configuring the Horn Alert Mode (
FUNC (K)/Ver 4.00
Table 23-4 Horn Alert Mode
Description
See FPRG 8.10.1 Common Page 1 Tab)
CONTENTS INDEX 497