Kenwood NEXEDGE NX-200 Function Reference page 243

Hide thumbs Also See for NEXEDGE NX-200:
Table of Contents

Advertisement

9 NXDN TRUNKING SYSTEM
9.5 Making an Individual Call (Transmission Trunked)
Note
• If Call Request Tone is enabled, a Call Request Tone sounds from the transceiver when the PTT switch is pressed to initiate a call
request. Also, if Call Processing Tone is enabled, a Call Processing Tone sounds from the transceiver while the PTT switch is pressed
and held after a call request is initiated by pressing the PTT switch. (Refer to
Been Initiated (Call Request Tone)/ Notifying the User with a Tone That a Call Request Is in Progress (Call Processing Tone) on page
212.)
• If PTT Proceed Tone is enabled, a Proceed Tone sounds from the transceiver when the transceiver becomes ready for
communications after the PTT switch is pressed. (Refer to
Tone) on page
92.)
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Configuring the Manual Dialing to be enabled or disabled (
Configuring the Selcall on PTT (NXDN Trunking System) (
Receiving an Individual Call (Transmission Trunked)
The transceiver can receive an Individual Call if the received Unit ID matches the Unit ID preconfigured in the transceiver.
Note
When the transceiver receives an Individual Call in an NXDN Trunking system, the transceiver will automatically send a response
message to the system indicating permission for the incoming calls.
Transceiver Behavior
1
The transceiver receives an Individual Call.
The Alert Tone (Individual Call) sounds from the transceiver and
then the ID Name of the transmitting transceiver will appear.
If the ID Name is not configured in the Unit ID List, the Unit ID List
number appears on the main display.
FUNC (K)/Ver 4.00
Notifying the User with a Tone That a Call Request Has
Using Sound to Notify the Timing to Start Communications (PTT Proceed
FPRG 8.12 Key Assignment Window)
See
See
FPRG 8.19.2 General 1 Tab)
See
FPRG 8.9.6 Selcall on PTT)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Mobile
CONTENTS
INDEX
209

Advertisement

Table of Contents
loading

Table of Contents