Kenwood NEXEDGE NX-200 Function Reference page 447

17 COMMUNICATION SECURITY
17.2 Optional Voice Scrambler (Analog)
 Disabling the Voice Scrambler
1
Press the Scrambler/ Encryption
The " " icon disappears, and the Voice Scrambler is disabled.
Configuration using KPG-111D/ DN
• Assigning functions to the PF keys on the transceiver (
• Configuring the Voice Scrambler to be enabled or disabled (
Scrambler)
Configuring the Scrambler Code
Pressing and holding the Scrambler/ Encryption key causes the transceiver to enter Scrambler/ Encryption Code Mode.
In Scrambler/ Encryption Code Mode, the Scrambler Code, which is used for when the transceiver scrambles and sends
the audio signal and when the transceiver receives the scrambled audio signal, can be configured for each channel.
Pressing the Menu key to enter Menu Mode and then selecting "Scrambler/ Encryption Code" also places the transceiver
in Scrambler/ Encryption Code Mode so that the Scrambler Code can be configured for each channel in the same manner
as noted above. (Refer to 3.4 Using Menu Mode on page
Only if the received Scramble Code matches the Scrambler Code preconfigured for the transceiver, the scrambled signal
can be descrambled and the received audio sounds normally from the transceiver.
Note
• The Scrambler Code can be configured using KPG-111D/ DN. The Scrambler Code configured using KPG-111D/ DN can also be
changed by a transceiver operation.
• When the status of Voice Scrambler (enabled or disabled) is switched on the channel where "Mixed" is configured for the Channel
Type, the status of Voice Scrambler (enabled or disabled) applies for the channel according to the channel mode (either Analog or
NXDN) configured using Transmit Mode.
Operating the Transceiver
1
Press and hold the
The transceiver enters Scrambler/Encryption Code Mode and the
Scrambler Code configured for the selected channel appears.
The following operations are identical even if the transceiver
enters Scrambler/ Encryption Code Mode by a user pressing the
Menu key.
FUNC (K)/Ver 4.00
key while Voice Scrambler is enabled.
Scrambler/ Encryption key.
See FPRG 8.12 Key Assignment Window)
FPRG 8.3.4 Page 2 Tab and 8.7.19 Voice
See
23.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 413