Writing The Configuration Data To The Transceiver - Kenwood NEXEDGE NX-200 Function Reference

2 GETTING STARTED

2.2 Writing the Configuration Data to the Transceiver

 Using the KPG-46U
2.2 Writing the Configuration Data to the Transceiver
Selecting "Write Data to the Transceiver" from the Program pulldown menu in the main window of KPG-111D/ DN opens
the Write Data to the Transceiver dialog box. Clicking the "Write" button starts writing the configuration data to the
transceiver.
Refer to FPRG "9.2 Write Data to the Transceiver" for details.
Note
When writing is executed with the Time Adjustment checkbox clicked on in the Write Data to the Transceiver dialog box, the time
configured in the PC is automatically configured in the transceiver. Refer to
page 500 for the operations to manually adjust the time of the transceiver after writing the configuration data.
FUNC (K)/Ver 4.00
To the Microphone Connector
KPG-46U
Figure 2-2 Write Data to the Transceiver Dialog Box
To a USB Port
25 ADJUSTING THE TIME ON THE TRANSCEIVER on
CONTENTS INDEX 12