Kenwood NEXEDGE NX-200 Function Reference page 506

20 OPTIONAL BOARD
20.2 VGS-1
Key Function
*2
Speaker Attenuation
Talk Around
*2
VOX
*1
Mobile only
*2
Portable only
Besides the functions listed above, the transceiver activates the Voice Guide in the following statuses and then
annunciates the following.
Category
Transceiver Password
*1
Key Lock
Message Playback
FleetSync
NXDN
*1
Portable only
Note
The transceiver does not emit the Key Beep A or Key Beep B tone while Voice Guide is enabled.
Configuration using KPG-111D/ DN
• Configuring the Zone-CH/GID Guide (
• Configuring the Function Guide (
FUNC (K)/Ver 4.00
Key Function On
Speaker Attenuation On
Talk Around On
VOX On
Table 20-5 Voice Guide
Transceiver Status
When the transceiver is operated during Transceiver
Password Mode
When the transceiver is operated while the Key Lock function
is enabled
When a Message is selected
When data is selected from the Selcall List
When data is selected from the Status List
When no Status Message is received by the target transceiver
even if a Status Message is sent
When data is selected from the Unit ID List
When data is selected from the Group ID List
When data is selected from the Status List
When no Status Message is received by the target transceiver
even if a Status Message is sent
FPRG 8.11.3 VGS-1 Tab)
See
FPRG 8.11.3 VGS-1 Tab)
See
Audio Content
Key Function Off
Speaker Attenuation Off
Talk Around Off
VOX Off
Radio Locked
Keys Locked
"Time" - "Message Type"
Example:
"ten-thirty AM Voice memo"
"twelve-eleven PM Reply Message"
ID List "Number"
Example:
"ID List forty-three"
Status List "Number"
Example:
"Status List sixty-eight"
Message Denied
ID List "Number"
Example:
"ID List forty-three"
ID List "Number"
Example:
"ID List forty-three"
Status List "Number"
Example:
"Status List sixty-eight"
Message Denied
CONTENTS
Audio Content
INDEX 472