Kenwood NEXEDGE NX-200 Function Reference page 263

9 NXDN TRUNKING SYSTEM
9.9 Making an Informative Group Call (Broadcast Group Call)
2
Press the Broadcast
Broadcast Group Call will be enabled.
The following operations are identical even if Broadcast Group
Call is enabled by pressing the Menu key.
3
Press the PTT switch.
The transceiver starts initiating a call.
Pressing the Broadcast key after the transmission causes
Broadcast Group Call to be disabled.
Note
• If PTT Proceed Tone is enabled, a Proceed Tone sounds from the transceiver when the transceiver becomes ready for
communications after the PTT switch is pressed. (Refer to
Tone) on page 92.)
• For details on the information displayed on the main display during transmission, refer to
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Receiving a Broadcast Group Call
If the received Group ID matches the Group ID configured for the transceiver, the transceiver can receive the Broadcast
Group Call.
Note
The transceiver can receive the Broadcast Group Call initiated using the Group ID for which "ALL" is configured even if no Group ID is
configured for the transceiver.
FUNC (K)/Ver 4.00
key.
Using Sound to Notify the Timing to Start Communications (PTT Proceed
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
 Display during transmission on page
FPRG 8.12 Key Assignment Window)
See
Mobile
CONTENTS INDEX
207.
229