Kenwood NEXEDGE NX-200 Function Reference page 299

10 ANALOG CONVENTIONAL SYSTEM
10.3 Changing the Decode/ Encode Combination of the QT/DQT (OST)
Configuration using KPG-111D/ DN
Configuring the Off-hook Decode to be enabled or disabled (
10.3 Changing the Decode/ Encode Combination of the QT/DQT
(OST)
Operator Selectable Tone (OST) can be used to change the Decode/ Encode combination of the QT/DQT signaling
without changing the transmit and receive frequencies.
If there are multiple groups using the same frequency but a different QT tone or DQT code, this function can be used to
allow a dispatcher to specify the target group to command.
A maximum of 40 pairs of QT tone frequencies or DQT codes for Decode/ Encode signaling for OST can be configured in
the OST Table using KPG-111D/ DN. (Refer to
Note
• OST is disabled when the zone or channel is changed. However, OST is enabled again when the transceiver restores the previous
channel while OST Status Memory is enabled. (Refer to
• If Talk Around and Operator Selectable Tone (OST) are both activated, the OST has priority.
• If "OST List Number" is configured for Sub-LCD Display, the OST List number appears on the sub-display. (Refer to
on page 81.)
• This function is unavailable for NX-200S/ NX-300S.
Configuring the OST to be Enabled or Disabled
Pressing the Operator Selectable Tone key causes the OST to be enabled or disabled.
Also, the OST can also be enabled or disabled by selecting "OST" after entering Menu Mode by pressing the Menu key.
(Refer to 3.4 Using Menu Mode on page
Operating the Transceiver
 Enabling the OST
1
Press the Operator Selectable Tone
The " " icon appears and then OST will be enabled. The OST Name appears on the main display for 2 sec.
 Enabling the OST
1
Press the Operator Selectable Tone
The " " icon disappears and OST will be disabled.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
FUNC (K)/Ver 4.00
See
OST Table on page 269.)
OST Status Memory on page
23.)
key while OST is disabled.
key while OST is enabled.
See FPRG 8.12 Key Assignment Window)
FPRG 8.10.1 Common Page 1 Tab)
268.)
CONTENTS
Sub-LCD Display
INDEX 265