Adjusting The Volume Level; Using Function Keys - Kenwood NEXEDGE NX-200 Function Reference

3 BASIC OPERATIONS
3.2 Adjusting the Volume Level/ 3.3 Using Function Keys
3.2

Adjusting the Volume Level

Portable
Rotating the Volume control clockwise increases the volume level from the speaker, and rotating the Volume control
counterclockwise decreases the volume level from the speaker.
Mobile
Pressing the Volume Up key increases the volume level in steps of 1. Pressing the Volume Down key decreases the
volume level in steps of 1.
If "Volume Up (Continuous)" or "Volume Down (Continuous)" is assigned to the Volume Up or Volume Down key, the
volume level will be increased or decreased continuously every 100 ms by holding down the Volume Up or Volume Down
key.
3.3

Using Function Keys

The following functions can be assigned to each key of the transceiver using KPG-111D/ DN. Pressing a key to which a
function is assigned can activate the assigned function or place the transceiver in various Function Modes. (Refer to
Available Functions for the PF Keys on page
Following are the configuration examples for each key of the transceiver.
Key
Back
Left
Right/Home
A function can be assigned to Function, 2nd Function and Hold of each key on the transceiver.
 Function
The function is activated by pressing a key.
In the configuration example above, pressing the Back, Left, or Right/Home key activates the function assigned to
each key.
If a key to which Function is assigned is pressed, the transceiver waits for a function assigned to 2nd Function to be
activated.
 2nd Function
The function is activated by pressing a key to which the function is assigned to 2nd Function after the Function key is
pressed.
In the configuration example above, pressing the Left key after the Right/Home key is pressed activates the Autodial
function.
 Hold
The function is activated by pressing and holding a key for the length of time configured for Hold Delay.
In the configuration example above, pressing and holding the Back key for 3 sec activates the function.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
FUNC (K)/Ver 4.00
510.)
Table 3-2 Configuration Examples for Keys
Function 2nd Function
Home CH/GID
Key Lock Autodial
Function
Hold
None Home CH/GID Select
None
None None
FPRG 8.12 Key Assignment Window)
See
Hold Delay
3.0
1.0
1.0
CONTENTS INDEX 19