Kenwood NEXEDGE NX-200 Function Reference page 140

7 BATTERY (PORTABLE ONLY)
7.1 Displaying the Remaining Battery Power Level (Battery Indicator)
NX-200S/ NX-300S
For NX-200S/ NX-300S, the Battery Indicator is the function that warns by lighting an LED when the remaining battery
level is low.
Conditions to activate the Battery Indicator vary depending on the configuration for Battery Warning. (Refer to
that the Battery Voltage Is Low (Battery Warning) on page
Configuration
Off The transceiver does not notify a user with the LED that the remaining battery power is low.
LED The transceiver notifies a user by a lighting or blinking LED that the remaining battery power is low.
Upon pressing the Battery Indicator key, the lit or blinking LED notifies a user that the remaining battery level is low as
follows.
LED
Lit green Full
Lit orange Sufficient
Lit red Low
Blinking red Very Low
However, in the following cases, a Key-entry Error Tone sounds from the transceiver and the Battery Indicator does not
work even if the Battery Indicator key is pressed.
• If "Off" is configured for Battery Indicator.
• If "LED" is configured for Battery Indicator and "While Transmitting" is configured for Battery Warning.
Configuration using KPG-111D/ DN
Configuring the Battery Indicator (
FUNC (K)/Ver 4.00
107.)
Table 7-3 Battery Indicator (NX-200S/ NX-300S)
Table 7-4 LED
See FPRG 8.10.3 Common Page 3 Tab)
Description
Status
CONTENTS
7.2 Warning
INDEX 106