Locator Tone; Sidetone; Volume Level Tone; Alert Tone - Kenwood NEXEDGE NX-200 Function Reference

6 SOUND
6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed

Locator Tone

Locator Tone sounds from the transceiver at the beginning and end of automatic transmissions in Emergency Mode.
Function
Emergency Locator Tone

Sidetone

Sidetone sounds from the transceiver when the transceiver can communicate or the transceiver completes a transmission.
Function
Proceed Tone
VOX Proceed Tone
(Portable only)
PTT ID Sidetone

Volume Level Tone

Volume Level Tone sounds from the transceiver when the volume level is changed.
Function
Fixed Volume Key Tone
Volume Key Tone
(Mobile only)

Alert Tone

Alert Tone sounds from the transceiver when the transceiver receives various types of calls, Status Message, or Short
Message. (Refer to 6.2 Tones that Sound When the Transceiver Receives a Call on page
Function
Special Alert Tone
FUNC (K)/Ver 4.00
Table 6-5 Locator Tone
This tone sounds from the transceiver before and after automatic transmissions in Emergency Mode.
Table 6-6 Sidetone
This tone sounds from the transceiver when the transceiver completes a connection to a repeater when
a user presses the PTT switch in an LTR Trunking system or NXDN Trunking system.
In a Conventional Group, this tone can be used to prevent missing the beginning of audio to be
transmitted.
This tone can be used coupled with Proceed Tone Delay Time.
This tone sounds from the transceiver when the transceiver transmits while VOX is activated.
This tone sounds from the transceiver when the transceiver transmits a FleetSync PTT ID.
Table 6-7 Volume Level Tone
This tone sounds from the transceiver when the volume level is changed by using the Fixed Volume key.
This tone sounds from the transceiver when the volume level is changed by pressing the Volume Up or
Volume Down key.
Table 6-8 Alert Tone
This tone sounds from the transceiver when the transceiver receives various types of calls, Status
Message, or Short Message.
A maximum of 8 types of tones can be arbitrarily configured or changed. (Refer to
Tone (Alert Tone Pattern) on page
Description
Description
Description
Description
91.)
CONTENTS
90.)
Configuring the Alert
INDEX 89