14 DTMF
14.1 Method of Sending the DTMF Code
3
Press the
Menu ([
An entered digit stops blinking and remains lighted.
4
Repeat Steps 2 and 3 as necessary.
5
Select one of the following operations.
• To send the DTMF code and initiate voice calls, the PTT switch
needs to be pressed.
• To send only the DTMF code, the Side 2 key (NX-200/ NX-210/
NX-300/ NX-410/ NX-411) or the Square key (Mobile) needs to
be pressed.
The transceiver sends the DTMF code.
Configuration using KPG-111D/ DN
•
Configuring the Store & Send to be enabled or disabled (
•
Assigning functions to the PF keys on the transceiver (
•
Assigning functions to the Keypad Operation on the transceiver (
•
Configuring the * and # key-entry Pattern to be enabled or disabled (
FUNC (K)/Ver 4.00
]) key when the code is determined.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
See
FPRG 8.14.1 Encode Tab)
See
FPRG 8.12 Key Assignment Window)
FPRG 8.12.2 General Tab)
See
FPRG 8.12.2 General Tab)
See
CONTENTS
Mobile
Mobile
INDEX
364