Warning That The Battery Voltage Is Low (Battery Warning) - Kenwood NEXEDGE NX-200 Function Reference

7 BATTERY (PORTABLE ONLY)

7.2 Warning that the Battery Voltage Is Low (Battery Warning)

7.2 Warning that the Battery Voltage Is Low (Battery Warning)
Battery Warning can be used to notify a user by emitting a beep or blinking the LED when the remaining battery power is
low.
The transceiver always monitors whether the battery voltage goes low and notifies a user that the remaining battery power
is low according to the configuration for Battery Indicator when the battery voltage level goes lower than the warning
voltage level. (Refer to 7.1 Displaying the Remaining Battery Power Level (Battery Indicator) on page
Configuration
The transceiver detects that the battery voltage is low while transmitting. When the battery voltage level goes
lower than the warning voltage level (6.2 V), the transceiver notifies a user that the remaining battery power
While Transmitting is low by a blinking red Transmit LED.
The "Battery Status" icon does not appear even if "LCD" or "LCD & LED" has been configured for Battery
Indicator; however, the transceiver notifies only by Transmit LED that the remaining battery power is low.
The transceiver always detects whether the battery voltage goes low while the transceiver is in use. When
the battery voltage goes below the warning voltage level (during transmission: 6.2 V, non-transmission: 7.0
Always
V), the transceiver notifies a user that the remaining battery power is low according to the Battery Indicator
configuration by changing the "Battery Status" icon, and by blinking a red Transmit LED.
The transceiver always detects whether the battery voltage goes low while the transceiver is in use. When
the battery voltage goes below the warning voltage level (during transmission: 6.2 V, non-transmission: 6.5
Always - Late Warning
V), the transceiver notifies a user that the remaining battery power is low according to the Battery Indicator
configuration by changing the "Battery Status" icon, and by blinking a red Transmit LED.
Also, if Battery Warning Tone is enabled, the transceiver notifies a user that the remaining battery power is low by making
the Battery Warning Tone sound from the transceiver if the PTT switch is not pressed when the battery voltage level goes
lower than the warning voltage level.
Note
This function cannot be activated if "Off" has been configured for Battery Indicator.
Configuration using KPG-111D/ DN
• Configuring the Battery Warning (
• Configuring the Battery Warning Tone to be enabled or disabled (
FUNC (K)/Ver 4.00
Table 7-5 Battery Warning
Description
FPRG 8.10.3 Common Page 3 Tab)
See
FPRG 8.10.3 Common Page 3 Tab)
See
CONTENTS
105.)
INDEX 107