3.4.8 Replacing the SMB battery
Location of SMB battery
The SMB battery (SMB = serial measurement board) is located on the left hand
side of the frame as shown in the figure below.
xx1500002051
Required tools
Equipment, etc.
Standard toolkit
Product manual - IRB 8700
3HAC052853-001 Revision: F
WARNING
See instructions for batteries,
Note
The battery low alert (38213 Battery charge low) is displayed when the battery
needs to be replaced. The recommendation to avoid an unsynchronized robot
is to keep the power to the controller turned on until the battery is to be replaced.
© Copyright 2015-2018 ABB. All rights reserved.
3.4.8 Replacing the SMB battery
Safety risks during handling of batteries on page
Article number
Note
-
Content is defined in section
toolkit on page
3 Maintenance
36.
Standard
833.
Continues on next page
173