4 Repair
4.6.5 Replacing the balancing devices
Continued
5
6
7
8
9
Continues on next page
560
Action
Use caution and put the balancing device
onto upper and lower shafts.
Apply locking liquid on the threads of the
lock nuts.
Inspect that the bearings are axially
centered in the balancing device ears.
Secure the balancing device with the two
lock nuts.
Note
Make sure that the V-ring and support ring
is fitted correctly.
Remove the lifting accessories.
© Copyright 2015-2018 ABB. All rights reserved.
Note
xx1500002305
Locking liquid: Loctite 243
xx1500002307
Tightening torque: 120 Nm
xx1500001973
Product manual - IRB 8700
3HAC052853-001 Revision: F