2
3
4
5
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
Unscrew both screws on either side of the
cross roller bearing and fill grease from one
of the holes until grease appears in the
other hole.
Refit the two screws.
Wipe clean from residual grease.
Note
Inspect the cross roller bearing after a few
days running. Some of the refilled grease
may have emerged from the bearing. Wipe
clean from residual grease.
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.5.2 Lubricating the cross roller bearing
Note
Mobillux EP2
xx1500002054
Continued
179