ABB IRB 8700 Series Product Manual page 621

2
3
4
5
6
7
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
Unscrew the attachment screws with
washers.
CAUTION
Parting/mating motor pinion and hub, may
damage the splines if excessive force is
used.
If required, press the motor out of position
by fitting the removal tool, to the attach-
ment holes of the motor.
CAUTION
The motor weighs 14 kg.
Remove the motor by lifting it straight up
from the gear.
Make sure the motor pinion is not dam-
aged.
Disconnect the 24 VDC power supply.
© Copyright 2015-2018 ABB. All rights reserved.
4.7.5 Replacing the axis-6 motor
Note
xx1500003097
Removal tool M10
xx1500003098
Continues on next page
4 Repair
Continued
621