9
10
Connecting the axis-5 motor cables
1
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
Secure the motor with its attachment
screws and washers, using a bits extender.
Disconnect the 24 VDC power supply.
Action
Push the motor cables in through the cable
gland opening.
© Copyright 2015-2018 ABB. All rights reserved.
4.7.4 Replacing the axis-5 motor
Note
Bits extender: 3HAC12342-1
Tightening torque: 50 Nm.
Screw dimension: M10x30 quality 12.9
Gleitmo(4 pcs)
xx1200001017
Note
xx1500002717
Continues on next page
4 Repair
Continued
611