5.4.3 Installation locations for the calibration tools
Location of fixed calibration items
The figure shows how the robot is equipped with items for installation of calibration
tools for Axis Calibration (fixed calibration pins and/or bushings). The figure does
not show installed calibration tools.
A fixed calibration pin and a bushing for the movable calibration tool are located
on each axis as follows.
xx1500000786
Product manual - IRB 8700
3HAC052853-001 Revision: F
5.4.3 Installation locations for the calibration tools
© Copyright 2015-2018 ABB. All rights reserved.
5 Calibration
Continues on next page
809