ABB IRB 8700 Series Product Manual page 109

8
9
10
Product manual - IRB 8700
3HAC052853-001 Revision: F
3.3.2 Inspecting the oil level in axis-2 and 3 gearboxes
Action
Add or drain oil, if required.
Refit the oil plugs.
DANGER
Make sure all safety requirements are met when
performing the first test run. These are further
detailed in the section First test run may cause
injury or damage on page
© Copyright 2015-2018 ABB. All rights reserved.
Note
Type of oil and total amount is de-
tailed in Technical reference
manual - Lubrication in gearboxes.
Further information about how to
drain or fill with oil is found in sec-
tion
is-3 gearbox on page
Tightening torque: 24 Nm.
27.
3 Maintenance
Continued
Changing oil in axis-2 and ax-
147.
109