ABB IRB 8700 Series Product Manual page 487

2
3
4
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
Use a Scotch-brite abrasive cleaning hand
pad and rub the contact surfaces on the
shafts.
Wipe the contact surfaces on shaft, outer
ring of bearing and sealing ring meticu-
lously clean with Isopropanol.
Note
Do not touch the cleaned cone surface of
the shaft with anything after cleaning.
Use a Scotch-brite abrasive cleaning hand
pad and rub the contact surfaces in the
holes for the shafts, outer ring of bearings
and sealing rings.
© Copyright 2015-2018 ABB. All rights reserved.
4.5.7 Replacing the parallel arm
Note
Scotch-brite abrasive cleaning hand pad
xx1500002749
Isopropanol
xx1500002749
Scotch-brite abrasive cleaning hand pad
xx1500002750
Continues on next page
4 Repair
Continued
487