Inspecting The Oil Level In Axis-4 Secondary Gearbox - ABB IRB 8700 Series Product Manual

3.3.4 Inspecting the oil level in axis-4 secondary gearbox

Location of oil plug
The oil plug through which the oil is inspected is located as shown in the figure.
xx1500002000
Required tools
Equipment
Standard toolkit
Required consumable
Consumable
Lubrication oil
Required documents
Document
Technical reference manual - Lub-
rication in gearboxes
Inspecting the oil level in axis-4 secondary gearbox
1
2
Product manual - IRB 8700
3HAC052853-001 Revision: F
3.3.4 Inspecting the oil level in axis-4 secondary gearbox
Article number
-
Action
Jog axis-2 to -60° position approximately.
Jog axis-3 to +10° position approximately.
© Copyright 2015-2018 ABB. All rights reserved.
Note
Content is defined in section
toolkit on page
Article number Note
- Information about the oil is found
in Technical reference manu-
al - Lubrication in gearboxes.
Document number Note
3HAC042927-001
Note
3 Maintenance
Standard
833.
Continues on next page
113