Changing Oil, Axis-4 Secondary Gearbox - ABB IRB 8700 Series Product Manual

3.4.5 Changing oil, axis-4 secondary gearbox

Location of oil plugs
The oil plugs of the gearbox are located as shown in the figures.
xx1500002020
Draining plug
Tightening torque: 24 Nm.
Required consumable
Material
Lubricating oil
Required tools and equipment
Equipment, etc.
Oil collecting vessel
Standard toolkit
Required documents
Document name
Technical reference manu-
al - Lubrication in gearboxes
Product manual - IRB 8700
3HAC052853-001 Revision: F
3.4.5 Changing oil, axis-4 secondary gearbox
Note
Information about the oil is found in Technical refer-
ence manual - Lubrication in gearboxes.
See
Article number
-
-
Document number
3HAC042927-001
© Copyright 2015-2018 ABB. All rights reserved.
xx1500002019
• Top = Ventilation plug
• Bottom = Inspection plug
Tightening torque: 24 Nm.
Type and amount of oil in gearboxes on page
Note
The capacity of the vessel must be
sufficient to take the complete amount
of oil.
Content is defined in section
toolkit on page 833.
Note
Continues on next page
3 Maintenance
140.
Standard
159