ABB IRB 8700 Series Product Manual page 108

3 Maintenance
3.3.2 Inspecting the oil level in axis-2 and 3 gearboxes
Continued
Inspecting the oil level in axis-2 and axis-3 gearboxes
The procedure to inspect oil in the axis-2 and axis-3 gearboxes is the same.
1
2
3
4
5
6
7
Continues on next page
108
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
WARNING
Handling gearbox oil involves several safety risks.
Before proceeding, please read the safety inform-
ation in the section Safety risks during work with
gearbox lubricants (oil or grease) on page
CAUTION
The gearbox can contain an excess of pressure
that can be hazardous. Use caution when the oil
plug is opened, in order to let out the excess
pressure.
Open the ventilation plug.
Note
The ventilation plug shall be opened prior to the
inspection plug, in order to release possible
pressure inside.
Open the inspection plug.
Inspect the oil level.
Required oil level is a few millimeters below the
lower edge of the inspection hole.
© Copyright 2015-2018 ABB. All rights reserved.
Note
37.
xx1500001994
xx1500001995
Product manual - IRB 8700
3HAC052853-001 Revision: F