ABB IRB 8700 Series Product Manual page 137

Required equipment
Equipment
Fork lift accessory
Standard toolkit
Inspecting, fork lift device set
1
2
3
4
5
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working area.
Inspect the fork lift accessory pockets for damage.
Inspect the attachment screws for deformation and
other type of damage.
Make sure the fork lift pockets are properly attached
(4 pcs).
If any damage is detected, the fork lift pockets and
attachment screws must be replaced.
© Copyright 2015-2018 ABB. All rights reserved.
3.3.13 Inspecting the fork lift accessories
Article number Note
3HAC053662-003
- Content is defined in section
toolkit on page
3 Maintenance
Continued
Standard
833.
Note
Tightening torque: 300 Nm
Article number is specified in
Required equipment on page
Attachment screws: M20x60
quality steel 8.8-A3F
134.
137